MultiPlus Compact 12V/1200VA/50A-16/230V VE.Bus Inverter/Charger


Technical-Data-Sheet

Input Battery Voltage Range 19 – 33 V
Nominal AC output Voltage 230 VAC ± 2%
Continuous Power Rating 1200VA @ 25 °C
Peak Inverter Efficiency 94%
Waveform Pure Sine Wave
Nominal DC Input Voltage 24V
AC input Voltage Range 187-265 VAC
Frequency Range AC Input 45 – 55 Hz
Dimensions 375x214x110mm
Weight 10kg

KSh 106,605.00 ex. TAX - KSh 106,605.00 inc. TAX

Compare

MultiPlus Compact 12V/1200VA/50A-16/230V VE.Bus Inverter/Charger

The MultiPlus Compact 12V/1200VA/50A-16/230V VE.Bus Inverter/Charger is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Models range from 800VA to 5000VA per module.

MultiPlus Compact 12V/1200VA/50A-16/230V VE.Bus Inverter/Charger Key Features

Two AC Outputs

The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.
The second output is live only when AC is available on one of the inputs of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more).

Virtually unlimited power thanks to parallel operation

Up to 6 Multi’s can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity.

Three phase capability

In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity.

PowerControl – Dealing with limited generator, shore side or grid power

The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.

PowerAssist – Boosting the capacity of shore or generator power

This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.

Solar energy: AC power available even during a grid failure

The Quattro can be used in off grid as well as grid connected PV and other alternative energy systems.
Loss of mains detection software is available.

System configuring

– In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.
– Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configuration software.
– Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications).

On-site Monitoring and control

Several options are available: Battery Monitor, Multi Control Panel, Ve.Net Blue Power Panel, Color Control

Panel, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).

Remote Monitoring and control

Victron Ethernet Remote, Victron Global Remote and the Color Control Panel.
Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.

Remote configuring

When connected to the Ethernet, systems with a Color Control panel can be accessed and settings can be changed.

Technical Specification

Country of Manufacture China
Dimensions (mm) 375 x 214 x 110
Grid Voltage 230V
IP Rating IP21
Power (Watts) N/A
SKU CMP121220000
Voltage 12V
Weight (kgs) 10
Input Battery Voltage Range 19 – 33 V
Nominal AC output Voltage 230 VAC ± 2%
Continuous Power Rating 1200VA @ 25 °C
Peak Inverter Efficiency 94%
Waveform Pure Sine Wave
Nominal DC Input Voltage 24V
AC input Voltage Range 187-265 VAC
Frequency Range AC Input 45 – 55 Hz
Dimensions 375x214x110mm
Weight 10kg
Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “MultiPlus Compact 12V/1200VA/50A-16/230V VE.Bus Inverter/Charger”

There are no reviews yet.

error: Content is protected !!