-10%
,

Lorentz PS 150 Boost-125 Surface Solar Pump System

Availability:

Out of stock


LORENTZ_PS150_boost-125_Datasheet

Pump System PS 150 Boost-125
max. total dynamic head [m] 110
max. flow rate [m³/h] 0.5
Solar Operation: Max Power Voltage (Vmp) >17
Solar Operation: Open Circuit Voltage [V DC] max. 50
Solar Operation: Nominal Voltage [V DC] 12-24
Battery Operation: Nominal Voltage [V DC] 12 and 24
Pump Type Positive Displacement

KSh 94,500.00 KSh 105,000.00 ex. TAX - KSh 94,500.00 inc. TAX

Out of stock

Compare

Lorentz PS 150 Boost-125 Surface Solar Pump System

Lorentz PS 150 Boost-125 Surface Solar Pump System are high quality products designed for higher pressure, low flow clean water boost applications. Boost pumps are typically used to pressurize water supplies. PS boost pumps provide high water pressures economically, without pollution, anywhere.

Please note: Lorentz has announced that LORENTZ solar panels must now be used with all Lorentz solar pumping systems.

  • Solar operated surface vane type pump
  • Max lift up to 90 m
  • Max flow rate 0.48 m³/h
  • Simple installation
  • High reliability and life expectation
  • Cost efficient pumping
  • Wetted materials: stainless steel, brass, rubber, plastic.

LORENTZ PS150 Boost provides city water pressure, anywhere. It has been a standard in home renewable energy systems since 1986. It is economical for domestic water supply, drip irrigation and water purification. Use solar-electric power to provide 250 to 10,000 litres per day from shallow water sources. PS150 Boost can push water as high as 140 m.

 

For 12 V to 24 V systems (1-2 solar modules or batteries in series) uses only one and the same motor and controller for solar direct or battery systems. Same flow at 12 V or 24 V.

 

LORENTZ PS150 Boost is not submersible, but can draw water from shallow wells, springs, cisterns, tanks, ponds, rivers and streams and push it through miles of pipeline. Slow pumping minimizes the size and cost of the solar array-battery system, wire and piping.

 

LORENTZ PS150 Boost is more powerful, quieter and much more durable than plastic RV/Marine pumps. It is less expensive than submersible DC pumps. Wearing parts typically last 5 to 10 years. Overall life expectancy is 15 to 20 years.

 

Applications

 

  • Drinking water supply
  • Water purification and filtration
  • Pressurizing for home water systems
  • Drip irrigation
  • Water circulation in thermal solar collectors(max +60ºC, +90ºC on request)

Warranty

 

  • 1 year against defects in materials and workmanship

Features

 

  • Rotary vane mechanism (positive displacement) made of forged brass, carbon- graphite and stainless steel
  • Clamp on assembly avoids alignment problems
  • Handles sea water, dissolved minerals
  • Survives most freezes
  • Brushless DC motor (maintenance free) is same for 12 V and 24 V application with SAME flow rates
  • Controller includes 12/24 V-7 Amps battery charger
  • MPP tracking, current booster for solar direct applications, pump speed control, low voltage disconnect for battery protection, terminals for float / remote switch and low water probe.
  • Installation and service manual is highly detailed and illustrated
  • Simple installation
  • High reliability and life expectancy
  • Cost-efficient pumping

Lorentz PS 150 Boost-125 Surface Solar Pump System specifications

Head max. 110m
Flow rate max. 0,50m 3/h
Controller Ps2-150
Power max. 0,30kW
Input voltage max. 50 V DC
Optimum Vmp** > 17 V
Motor current max. 22 A
Efficiency max. 98 %
Ambient temp. -40…50 °C
Enclosure class IP68
Pump Unit PU BOOST-125
Water temperature max. 80°C
Suction head max. 3m
Pump end PE BOOST-125
Material brass
Motor ECDRIVE 150-BOOST
Rated Power 0,3 kW
Motor speed 280… 1750 rpm
Input voltage 18V
Material AL/AISA 304
Insulation class F
Enclosure class IPX4

 

LORENTZ_PS150_boost-125_Datasheet

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Lorentz PS 150 Boost-125 Surface Solar Pump System”

There are no reviews yet.

error: Content is protected !!