Victron Phoenix 500 VA 48 V Inverter VE.Direct converts 48 V DC battery power into clean AC output via a pure sine wave, making it ideal for telecommunications, off-grid solar systems, remote sites, small backup installations or industrial signaling loads. With integrated VE.Direct communication for monitoring and configuration, plus an ECO/standby mode to minimize idle consumption, this compact inverter is engineered to reliably power sensitive electronics, emergency loads, and essential devices even in harsh environments.
Key Features
Pure sine wave AC output — safe for sensitive electronics (computers, telecom gear, audio, medical)
500 VA continuous output rating (suitable for light to moderate loads)
Surge / peak capacity — supports equipment startup currents
VE.Direct interface — allows system monitoring, tuning, firmware updates, diagnostics
ECO / standby mode — reduces idle power draw during light loads
Selectable AC output voltage and frequency (e.g. 230 V, 50 Hz or region variant)
Adjustable low-voltage alarm, cut-off, restart thresholds, dynamic cut-off behavior
Comprehensive protection suite: overload, short circuit, under/over voltage, overtemperature
Compact, robust design for installation in tight or remote settings
Technical Data Table
| Parameter | Specification |
|---|---|
| DC Input Voltage | 48 V (nominal) |
| Continuous Output (VA) | 500 VA |
| Approximate Continuous Output (W) | ~400 W (for mixed loads) |
| Surge / Peak Capability | Capable of short surge / startup load support |
| Output Voltage (Nominal) | 230 V AC (± tolerance) / or regional variant |
| Output Frequency | 50 Hz (or 60 Hz variant) |
| Efficiency (Peak) | > 90 % (typical for Phoenix VE.Direct series) |
| No-Load / Idle Consumption | Very low (few watts) in normal mode, lower in ECO mode |
| ECO Mode Threshold | Load falls below ~15 W (then enters standby) |
| Protections | Overload, short circuit, under/over voltage, overtemperature |
| Communication / Interface | VE.Direct port |
| Adjustable Settings | Low-voltage alarm, cut-off, restart, dynamic cut-off |
| Dimensions / Weight | See official Phoenix VE.Direct datasheet |
| Battery Connection / Wiring | Screw terminals, recommended cable gauge per installation norms |
| Warranty | Follow Victron standard warranty for Phoenix series |
/p/li%20li%20data-start=797%20data-end=871p%20data-start=799%20data-end=871500%20VA%20continuous%20output%20rating%20(suitable%20for%20light%20to%20moderate%20loads)/p/li%20li%20data-start=872%20data-end=935p%20data-start=874%20data-end=935Surge%20/%20peak%20capacity%20—%20supports%20equipment%20startup%20currents/p/li%20li%20data-start=936%20data-end=1025p%20data-start=938%20data-end=1025VE.Direct%20interface%20—%20allows%20system%20monitoring,%20tuning,%20firmware%20updates,%20diagnostics/p/li%20li%20data-start=1026%20data-end=1093p%20data-start=1028%20data-end=1093ECO%20/%20standby%20mode%20—%20reduces%20idle%20power%20draw%20during%20light%20loads/p/li/ul&media=https://solarshop.co.ke/wp-content/uploads/2025/10/Inverter20VE.webp){kind=link}