TBB RiiOSun II 5000W 48V Hybrid Solar Inverter details
TBB RiiOSun II 5000W 48V Hybrid Solar Inverter series is TBB’s brand-new versatile all-in-one solar inverter for off-grid, ESS, and self-consumption applications, combining a pure sine wave inverter, battery charger, MPPT solar charge controller and a high-speed automatic transfer switch in a compact casing. It boasts higher PV open circuit voltage, higher PV charging power and current, and supports parallel and three-phase operation up to 9 units to achieve higher power output (up to 72kVA). It is optional to work without a battery and only use solar energy to power loads directly. A programmable smart port is also equipped in 5kVA, 6kVA, and 8kVA models for generator input or load management.
TBB RiiOSun II 5000W 48V Hybrid Solar Inverter can be used for generator hybrid system. With innovative function of Power Control and Power Assist, it can be used to work with generator or a limited AC source. Kinergier Pro can automatically adjust its charging current avoiding generator or grid to be overloaded. In case of high power requirement appeared, it can work as the supplement source to generator or grid. As the result, it could dramatically improve the fuel efficiency and decrease the size of generator as well.
TBB RiiOSun II 5000W 48V Hybrid Solar Inverter
Tbb RiioSun II supports parallel and three phase operation up to 9 units to achieve higher power output (up to 72KVA) Yo start with the comprehensive or a smaller solution and gradually expand it, depending o what best suits your needs and budget.
TBB RiiOSun II 5000W 48V Hybrid Solar Inverter Optional to Work with or without Battery
The energy produced by the solar panels is directed to the house for use and they not need to produce all the electricity to run an entire household as shortfalls can be made up from the grid. Advantages of working without battery backup: Savings on electricity bills, less installation and acquisition costs, more environmental friendly, fewer components to maintain.
TBB RiiOSun II 5000W 48V Hybrid Solar Inverter Specifications
| Model |
RiiO Sun II 2KVA-M |
RiiO Sun II 3KVA-M |
RiiO Sun II 3KVA-S |
RiiO Sun II 4KVA-S |
RiiO Sun II 5KVA-S |
RiiO Sun II 6KVA-S |
| Power Assist |
Yes |
| AC input range |
175~265 VAC (45~65 Hz) |
| AC input Current (transfer switch) (A) |
32 |
32 |
32 |
32 |
50 |
50 |
| Inverter |
| Nominal battery voltage (V) / Input voltage (V) |
24 / 21~34 |
48 / 42~68 |
| AC output voltage (VAC) |
220/230/240 ± 2% |
| AC output Frequency (Hz) |
50/60 ± 0.1% |
| Harmonic distortion |
<2% |
| Load Power factor |
1.0 |
| Cont. output power at 25°C (VA) |
2000 |
3000 |
3000 |
4000 |
5000 |
6000 |
| Max output power at 25°C (W) |
2000 |
3000 |
3000 |
4000 |
5000 |
6000 |
| Peak power (W) |
4000 |
6000 |
6000 |
8000 |
10000 |
12000 |
| Surge |
300% |
| Maximum efficiency |
91% |
91% |
93% |
93% |
94% |
94% |
| Zero load power (W) |
13 |
17 |
17 |
19 |
22 |
25 |
| Charger |
| Charge voltage ‘absorption’ (V) / ‘float’ (V) |
28.8 / 27.6 |
57.6 / 55.2 |
| Battery types |
AGM / GEL / OPzV / Lead-Carbon / Li-ion / Flooded / Traction / Lithium |
| Max AC charge current (A) |
40 |
70 |
35 |
50 |
60 |
70 |
| Temperature compensation |
Yes |
| Solar Charge Controller |
| charge voltage ‘absorption’ (V) / ‘float’ (V) |
80 |
80 |
60 |
60 |
100 |
100 |
| Maximum PV open circuit voltage (V) |
150 |
150 |
250 |
250 |
250 |
250 |
| MPPT voltage range (V) |
40~145 |
40~145 |
65~245 |
| Number of MPPT trackers |
1 |
1 |
1 |
1 |
2 |
2 |
| Maximum PV input current per tracker (A) |
36 |
36 |
36 |
36 |
36 + 36 |
36 + 36 |
| Maximum PV short circuit current per tracker (A) |
40 |
40 |
40 |
40 |
40 + 40 |
40 + 40 |
| Maximum PV power per tracker (W) |
3600 |
3600 |
5200 |
5200 |
4400 + 4400 |
4400 + 4400 |
| Charge voltage ‘absorption’ (V) / ‘float’ (V) |
28.8 / 27.6 |
57.6 / 55.2 |
| MPPT charger maximum efficiency |
98% |
| MPPT efficiency |
>99.5% |
| Protection |
a) output short circuit; b) overload; c) battery voltage too high; d) battery voltage too low;
e) temperature too high; f) input voltage out of range |
| General data |
| AC Out1 Current (A) |
32 |
32 |
32 |
32 |
50 |
50 |
| Smart Port Current (A) |
N/A |
50 |
| Transfer time |
2ms (<15ms in Weak AC source Mode) |
| Protection |
a) output short circuit; b) overload; c) battery voltage too high; d) battery voltage too low;
e) temperature too high; f) input voltage out of range; g) input voltage ripple too high; h) Fan block |
| General purpose com. Port |
RS485 (GPRS, WLAN optional) |
| Programmable relay |
1x (30Vdc/3A or 250Vac/3A) |
| Operating temperature range |
-20˚C to 65˚C |
| Relative humidity in operation |
95% without condensation |
| Altitude (m) |
2000 |
| Mechanical Data |
| Dimension (mm) (max) |
499x272x144 |
570*310*154 |
| Net Weight (kg) |
14 |
18 |
18 |
20 |
29 |
31 |
| Cooling |
Forced fan |
| Protection index |
IP21 |
| Standards |
| Safety |
EN-IEC 62477-1, EN-IEC 62109-1, EN-IEC 62109-2 |
| EMC |
EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN 61000-6-3, EN 61000-6-4, EN 61000-3-11, EN 61000-3-12 |
Buy TBB RiiOSun II 5000W 48V Hybrid Solar Inverter in Kenya at Best Price from SolarShop Africa
.%20It%20is%20optional%20to%20work%20without%20a%20battery%20and%20only%20use%20solar%20energy%20to%20power%20loads%20directly.%20A%20programmable%20smart%20port%20is%20also%20equipped%20in%205kVA,%206kVA,%20and%208kVA%20models%20for%20generator%20input%20or%20load%20management.Download%20a%20href=https://www.tbbrenewable.com/getApi/profile/upload/2023/03/08/RiiO_Sun_II_All_in_One_Solar_Inverter_en_V1.7.pdfTbb%20RiioSun%20II%20Hybrid%20Solar%20Inverter%20charger%20pdf%20datasheet%20here%20>>>>>/aDownload%20a%20href=https://www.tbbrenewable.com/downloadsTbb%20RiioSun%20II%20Hybrid%20Solar%20Inverter%20charger%20pdf%20installation%20manual%20here%20>>>>>/a&media=https://solarshop.co.ke/wp-content/uploads/2024/03/TBB-Low-Frequency-Pure-Sine-Wave-Inverter-Charger-6000W-48VDC-for-Backup-System.jpg){kind=link}