Victron Phoenix 800 VA 48 V Inverter converts 48 V DC battery power into clean AC (230 V or 120 V depending on region) using a pure sine wave, making it ideal for remote systems, telecom, RV, off-grid solar, or backup installations. With the VE.Direct interface, you get full digital monitoring and configuration. ECO mode minimizes idle consumption, while protections guard against overload, over/under voltage, and temperature extremes. Compact and efficient, it supports sensitive electronics and moderate loads reliably in challenging settings.
Key Features
-
Pure sine wave AC output — safe for sensitive electronics (computers, audio, medical)
-
800 VA continuous output capability
-
Surge / peak power capacity to handle startup loads
-
VE.Direct communication port — for monitoring, firmware updates, parameter adjustment
-
ECO / standby mode to reduce idle power consumption
-
Adjustable low-voltage alarm, cut-off & restart thresholds, dynamic cut-off behavior
-
Selectable output voltage and frequency (region dependent)
-
Built-in protections: overload, short circuit, over/under voltage, overtemperature
-
Compact, robust form factor suited to fixed or mobile installations
Technical Data Table
| Parameter | Specification |
|---|---|
| DC Input Voltage | 48 V nominal |
| Continuous Output (VA) | 800 VA |
| Continuous Output (W, approximate) | ~ (region-dependent) — e.g. 640 W for mixed loads |
| Surge / Peak Capability | Supports startup surges (often ~2×) |
| Output Voltage (Nominal) | Region dependent: e.g. 230 V AC or 120 V AC ±2-3 % |
| Output Frequency | 50 Hz or 60 Hz (region selectable) |
| Efficiency (Peak) | > 90 % (typical) |
| No-Load / Idle Consumption | Very low (especially in ECO / standby mode) |
| Protections | Overload, short circuit, over/under voltage, temperature |
| Interface / Communication | VE.Direct |
| Adjustable Controls | Low battery alarm, cut-off, restart thresholds, dynamic cut-off |
| Dimensions / Mounting | From standard Victron Phoenix series (check datasheet PDF) |
| Warranty | As per Victron Phoenix series (check with vendor) |
/p/li%20li%20data-start=852%20data-end=929p%20data-start=854%20data-end=929800%20VA%20continuous%20output%20capability/p/li%20li%20data-start=930%20data-end=1023p%20data-start=932%20data-end=1023Surge%20/%20peak%20power%20capacity%20to%20handle%20startup%20loads/p/li%20li%20data-start=1024%20data-end=1151p%20data-start=1026%20data-end=1151VE.Direct%20communication%20port%20—%20for%20monitoring,%20firmware%20updates,%20parameter%20adjustment/p/li%20li%20data-start=1152%20data-end=1245p%20data-start=1154%20data-end=1245ECO%20/%20standby%20mode%20to%20reduce%20idle%20power%20consumption/p/li/ul&media=https://solarshop.co.ke/wp-content/uploads/2024/03/victron-800.webp){kind=link}
Reviews
There are no reviews yet.