Victron Phoenix 500VA 12V inverter converts 12 V DC battery power into clean, stable AC output via a pure sine wave—ideal for small off-grid solar setups, RVs, telecom units, or portable backup power. Equipped with VE.Direct communication, users can monitor and configure inverter parameters. An ECO/standby mode helps conserve battery when load is light. Compact, efficient and protected, it’s designed to reliably run sensitive electronics and small appliances even in challenging environments.
Key Features
-
Pure sine wave AC output — safe for computers, audio, medical, and sensitive devices
-
500 VA continuous output (approx. 400 W for resistive / mixed loads)
-
Surge / peak capability (e.g. up to ~900 W)
-
VE.Direct interface — real-time monitoring, configuration, firmware updates
-
ECO / standby mode — reduces no-load draw to a few watts
-
Wide AC output voltage window (e.g. 210–245 V) & selectable frequency (50 Hz / 60 Hz)
-
Built-in protection suite: overload, short circuit, over/under voltage, overtemperature
-
Compact and robust design — ideal for space-constrained or mobile installations
Technical Data Table
| Parameter | Specification |
|---|---|
| DC Input Voltage | 12 V |
| Continuous Output (VA) | 500 VA |
| Approximate Output (W, mixed load) | ~400 W |
| Surge / Peak Output | ~900 W |
| Output Voltage (Nominal) | 230 V AC (or 120 V variant in some markets) |
| Output Frequency | 50 Hz (or 60 Hz version) |
| Efficiency (Max) | ~90 % (typical for Phoenix range) |
| No-Load / Idle Consumption | ~6 W (or few watts) |
| AC Output Voltage Window | 210 – 245 V |
| Protections | Overload, short circuit, under/over voltage, overtemperature |
| Communication / Interface | VE.Direct |
| ECO / Standby Mode | Yes, automatic when load is light |
| Warranty | As per Victron Phoenix series (check vendor) |
/p/li%20li%20data-start=876%20data-end=961p%20data-start=878%20data-end=961Surge%20/%20peak%20capability%20(e.g.%20up%20to%20~900%20W)/p/li%20li%20data-start=962%20data-end=1041p%20data-start=964%20data-end=1041VE.Direct%20interface%20—%20real-time%20monitoring,%20configuration,%20firmware%20updates/p/li%20li%20data-start=1042%20data-end=1140p%20data-start=1044%20data-end=1140ECO%20/%20standby%20mode%20—%20reduces%20no-load%20draw%20to%20a%20few%20watts/p/li/ul &media=https://solarshop.co.ke/wp-content/uploads/2024/03/victron-multiplus-500w-12v-inverter.webp){kind=link}
Reviews
There are no reviews yet.