2.2 Kilowatts Hober Hybrid MPPT Solar Water Pumping inverter

KSh70,000KSh83,000 (-16%)

Sold By: Solar Shop

In stock

The 2.2KW MPPT Hybrid Solar water Pumping Inverter main functions include converting the DC power into Ac Power to drive the pump, and real-time adjust the output frequency to achieve the maximum power point tracking. The inverter is appropriate for single-phase pumps with power requirements below 2200 Watts. Output 1/3 phase 220V 50/60Hz

Ac input 1 Phase 220V 50/60Hz

Solar input 200~450VDC

Hybrid AC Power Input

Compare

LCD SCREEN -don’t need to check the instructions to know the meaning!!!

  1. Working time,
  2. Hybrid/stop,
  3. Dry-run Software protection,
  4. Water Sensor, AC output Voltage,
  5. AC output Phase loss,
  6. Easy Inverter Working Time Calibration,
  7. Over -Current or Over Load,
  8. Factory Reset
Stop reason: SPMCS, Timer, Solar Low Power, Hybridstart and stop, Water tank Full, Borehole level low(Pump dry-run), Pump dry-run by software, Pump over current, Overload, Overvoltage, Pcb ic error, Pump wire is broken…
Warning message E2prom, hybrid , Pump current unbalance, Current sensor, such as W: System TimeError message: Over voltage, AC output over Current…and so on…
Solar panel Input Voltage & Current, and Power, Hybrid State, Power input of solar and AC, AC Output Frequency & Current, Inside Temperature, Water Level state of borehole and Tank, Warning Message, Error Message

Additional information

Type

Hybrid, Offgrid

Only logged in customers who have purchased this product may leave a review.

Reviews

There are no reviews yet.

Vendor Information

  • Vendor: Solar Shop
  • 5.00 5.00 rating from 1 review

See It Styled On Instagram

    Instagram did not return a 200.

Main Menu