Phaeton PH380-2T Solar Pump Inverter 2.2kw 10A

KSh 36,900.00 KSh 38,900.00


Product Details and Features

This Phaeton PH380-2T Solar Pump Inverter 2.2kw 10A comes along with some of the following features:-

( Power range: 0.75-1.5kw for 110V, 0.75-7.5kw 220V, 0.75-37kw 380V)

  1. Built-in MPPT function and efficiency of up to 99.6%
  2. This Inverter Could drive both AM and PMSM pump
  3. Has an All-round-protection function with advanced hardware design
  4. Posses Perfect stability in output frequency
  5. Remote control and monitoring by GPRS system(Available in PC and mobile)
  6. The dry run function, therefore, gives protection to the pump
  7. The Phaeton PH380-2T Solar Pump Inverter 2.2kw 10A has an Automatic start and stop function
  8. DC and AC as input power sources accepted
  9. Low voltage input down to 60VDC input for 220V pump solution

PH330 MPPT Solar Pump Inverter IP20 1.5kw-15kw

Model Selection:
SN Model No. Rate current Output voltage ( 3PH AC) Applicable for pumps External of drive size(mm) MPPT voltage (VDC) Weight (kg)
General type 2S series: Input 150 to 450V DC or 200 to 240V AC, VOC 350 VDC
1 PH380-2S-0P7G 4A 220V/240V 0.75KW 252*195*230 260 to 375 2
2 PH380-2S-1P5G 7A 220V/240V 1.5KW 252*195*230 260 to 375 2
3 PH380-2S-2P2G 10A 220V/240V 2.2KW 252*195*230 260 to 375 2.5
4 PH380-2S-004G 16A 220V/240V 4.0KW 315*235*253 260 to 375 4.3

Technical Specifications:

Recommended MPPT voltage range Vmpp 131 to 350 VDC for 1S model (80V to 350VDC input, 3PH 110 to 220VAC output)
Vmpp 280 to 375VDC for 2S model ( 150V to 350VDC input, 3PH 220 to 240VAC output)
Vmpp 486 to 750 VDC for 4T model ( 250V to 800VDC input, 3PH 380 to 460VAC output)
The Recommended input voltage (Voc and Vmpp) Voc 180(VDC), Vmpp 155(VDC) for 1S model or 110V AC pumps
Voc 355(VDC), Vmpp 310(VDC) for 2T model or 220V AC pumps
Voc 620(VDC), Vmpp 540(VDC) for 4T model or 380V AC pumps
Motor type Control for permanent magnet synchronous motor (PMSM) and asynchronous motor (AM)
Input power DC power from solar arrays or AC grid power
Maximum DC power input 450VDC for 220AC output / 850VDC for 380V AC output
Rated output voltage 3-phase, 110V/160V/220V. 3-phase, 220V/380V/480V
Output frequency range 0~50/60Hz
MPPT efficiency 99%
Ambient temperature range -10℃ TO 50℃
Solar pump control special performance MPPT ( maximum power point tracking), CVT (constant voltage tracking), auto/manual operation, dry run protection, low stop frequency protection, minimum power input, motor maximum current protection, flow calculating, energy generated calculating
Protection function Phase loss protection, phase short circuit protection, ground-to-phase circuit protection, and input, and output short circuit protection. Stall protection
Protection degree IP20, Air force cooling
Running mode MPPT, CVT
Altitude Below 1000m; above 1000m, derated 1% for every additional 100m
Standard CE certificate

PH330 MPPT Solar Pump Inverter IP20 1.5kw-15kw

>> Click to view More about this product 

>> Click to go back home


Based on 0 reviews

0.0 overall

Be the first to review “Phaeton PH380-2T Solar Pump Inverter 2.2kw 10A”

There are no reviews yet.