SUNSYNK LIFELYNK S hybrid inverter is this neat, compact all-in-one energy storage system that’s perfect for smaller homes or even some light commercial spots where you want to dip your toes into solar without a massive setup. It packs a 2.5kW hybrid inverter, a built-in 2kWh LiFePO4 battery, and an MPPT solar charge controller all into one sleek wall-mounted unit. This thing handles power from solar panels, the grid, or even a generator, letting you store excess energy, cut down on bills by optimizing self-consumption, and switch seamlessly to backup mode during outages. With a pure sine wave output at 230V single-phase, it’s efficient (up to 97.6% max), quiet, and super easy to install thanks to plug-and-play connections. You can monitor everything remotely via the Sunsynk Connect app over Wi-Fi, tweak settings for time-of-use tariffs, and even parallel up to six units for more power if you expand later. It’s IP20 rated for indoor use, comes with a 5-year warranty, and is all about making renewable energy simple and reliable without the hassle of separate components.
SUNSYNK LIFELYNK S hybrid inverter Key Features
- All-in-One Compact Design: Integrates a 2.5kW hybrid inverter, 2kWh LiFePO4 battery, and MPPT controller in a single unit for easy wall-mounted installation and space-saving setup.
- Hybrid Operation Modes: Supports on-grid, off-grid, and UPS backup with automatic switching; optimizes solar self-consumption, grid export, and battery storage to reduce energy costs.
- Efficient Solar Harvesting: Built-in MPPT with up to 3kW PV input, 97.6% efficiency, and wide voltage range for maximum energy capture even in varying conditions.
- Smart Monitoring and Control: Wi-Fi connectivity and Sunsynk Connect app for real-time tracking of energy flow, remote customization, alerts, and compatibility with smart tariffs like Octopus Energy.
- Scalable and Expandable: Parallel up to 6 units; add extra batteries (up to 2 per inverter) for increased capacity; compatible with existing solar systems.
- Reliable Battery Performance: LiFePO4 technology with 6000 cycles at 80% DOD, overload/short-circuit protection, and fan-assisted cooling for safe, long-lasting operation.
SUNSYNK LIFELYNK S hybrid inverter Technical Data Table
| Specification | Value/Details |
|---|---|
| Inverter Type | Hybrid All-in-One |
| Rated AC Output Power | 2,500 W (2.5 kW) |
| Max. AC Output Power | 2,500 VA |
| Nominal AC Voltage | 230 V (single-phase, pure sine wave) |
| Nominal Frequency | 50 Hz |
| Power Factor Range | 0.8 leading to 0.8 lagging |
| Max. Bypass Current | 20 A |
| Battery Type | LiFePO4 (Lithium Ferro Phosphate) |
| Battery Capacity | 2 kWh (2,048 Wh) |
| Nominal Battery Voltage | 51.2 V |
| Battery Voltage Range | 40 V – 58 V |
| Max. Charging Current | 42 A |
| Max. Discharging Current | 56 A |
| Battery Cycles | 6,000 @ 80% DOD |
| Max. PV Input Power | 3,000 W |
| Max. PV Input Voltage | 500 V DC |
| MPPT Voltage Range | 120 V – 450 V DC |
| Start-Up Voltage | 150 V |
| Max. PV Input Current | 12 A |
| Number of MPPT Trackers | 1 |
| Max. Efficiency | 97.6% |
| Euro Efficiency | 97.0% |
| MPPT Efficiency | 99.9% |
| Battery to Load Efficiency | 94.0% |
| Protection Features | Overload, over-temperature, short-circuit, over/under voltage, surge protection |
| Communication | RS485, CAN, Wi-Fi (Sunsynk Connect app) |
| Cooling | Fan-assisted |
| Noise Level | Low (not specified, but designed for quiet operation) |
| Operating Temperature | Inverter: -25°C to +60°C; Battery Charge: 0°C to +45°C; Discharge: -20°C to +50°C |
| Enclosure Rating | IP20 (indoor) |
| Parallel Capability | Up to 6 units |
| Dimensions (H x W x D) | 701 mm x 544 mm x 105 mm |
| Weight | 38.5 kg |
| Warranty | 5 years |
| Certifications | Not fully specified; compliant with standard safety and EMC (e.g., IEC) |
Buy SUNSYNK LIFELYNK S hybrid inverter online in kenya at Solarshop Africa
Checkout: SUNSYNK
%20for%20increased%20capacity;%20compatible%20with%20existing%20solar%20systems./li/ul&media=https://solarshop.co.ke/wp-content/uploads/2025/11/SunsynkLifelynk2.5kW.webp){kind=link}